Problem in first launch

new

« Prev
1
Next »

balaji
New Member

Posts: 1

Problem in first launch Sept 14, 2017 9:45:20 GMT 1

Quote

Post by balaji on Sept 14, 2017 9:45:20 GMT 1

Hi,
I have installed panthera Free. But I can't able to run the software. I am getting following errors. I have attached the diagnostics file. Please help me solve the issue.

Attachments:

CrudenSimulinkVehicleModel_simulation_20170....txt (9.69 KB)

Last Edit: Sept 14, 2017 9:46:02 GMT 1 by balaji

jvd
New Member

Posts: 22

Problem in first launch Sept 25, 2017 8:56:34 GMT 1

Quote

Post by jvd on Sept 25, 2017 8:56:34 GMT 1

Hi,

Sorry for the slow reply. Unfortunately some of the SimDriveline blocks in the Simulink model are not supported anymore after Matlab 2015b. There will be an upgrade to PantheraFree where the SimDriveline toolbox is not needed at all anymore, but I don't know when this will be released. Of course you could also try to do this yourself: remove the SimDriveline blocks from the model and see if you can update it to get it to work.